Distributor Selection

Select the distributor you would like to use for your shopping cart.

Distributor

AC servo motor BSH - 1.3 N.m - 3000 rpm - keyed shaft - without brake - IP50 Zoomed Image
Schneider Electric

AC servo motor BSH - 1.3 N.m - 3000 rpm - keyed shaft - without brake - IP50

This product is part of the Lexium range, an offer of motion servo drives and servo motors. The 6-pole AC servo motor features a low moment of inertia with maximum mechanical speed of 9000RPM and IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder giving an angular shaft position precise to less than ±1.3 arc minutes. BSH servo motor satisfies requirements for precision and high dynamic performance, due to the low rotor inertia. It is compact, and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 1.7A and a maximum continuous power of 0.97W. The shaft dimensions are 9mm (Diameter) x 20mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP50 rated product. Its dimensions are 176.5mm (Length) x 55mm (Width), centring collar dimensions are 2mm (Depth) x 40mm (Diameter) with 63mm circle diameter of the mounting hole. It weighs 1.76kg. This product is compatible with Lexium 32, Lexium 05 and Lexium 15 servo drives. It supports international standard 55mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BSH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

Product details

SKU Code: BSH0553P11A2A

EAN Code: 3389118159402

Minimum order: 1

This product is currently unavailable in any shop. Please contact the manufacturer for information on where it can be sourced.

No Availability (0 sellers)

341 loyalty points

Technical Data

Main Features

Bearing

Other

Model

Rotary current synchronous motor

Number of phases

3

Rated frequency

Motor efficiency class

Other

Number of poles

6

Overload capability

FALSE

Cooling method

Other

Shaft end type

Parallel key

Degree of protection (IP)

IP50

Vacuum pressure impregnation (VPI)

Other

With positive temperature coefficient resistor (PTC)

FALSE

With resistance temperature detector (RTD)

FALSE

Intrinsic safety (IS)

None

Rated current

-

Rated voltage

480 V

Construction type

Other

Suitable for frequency control

FALSE

With anti-condensation

FALSE

Duty cycle

Other

Power factor

-

Voltage type

AC

Housing material

Other

Rated performance at rated frequency

0.34 kW

Rated rotational speed at rated frequency

8000 1/min

Nominal torque

0.65 Nm

Starting torque ratio

0

Breakdown torque ratio

0

Voltage anti-condensation heater

-

Output power anti-condensation heater

-

Frame size according to IEC

-

Operating temperature

Full-load efficiency

-

Starting current ratio

0

Degree of protection (NEMA)

-

Insulation class according to IEC

Other

Downloads

Deeplink product page

Environmental compliance declaration

User guide

Product data sheet

Catalogue

Environmental compliance declaration

Environmental compliance declaration

Declaration of conformity

Environmental disclosure