LuckinsTSICode

433612861

Style

Metal Clad

Colour

Grey

Insert Colour

White

Dimensions (mm)

140 (W) x 80 (H) x 42 (D)

Gang (Switch/Socket/Module)

2

Gang (Size)

2

Materials

Front Plate & Mounting Box: Electrophoretically Coated Steel Insert & Rocker Switch: Urea Rear Housing: Urea Terminals: Brass Terminal Screws: Steel & Yellow Passivated Contacts: Silver "on-lay" Copper / Brass Internal Busbars: Formed Pressed Brass Earth Strap: Mild Steel

Materials 1

Front Plate & Mounting Box: Electrophoretically Coated Steel

Materials 2

Insert & Rocker Switch: Urea

Materials 3

Rear Housing: Urea

Materials 4

Terminals: Brass

Materials 5

Terminal Screws: Steel & Yellow Passivated

Materials 6

Contacts: Silver "on-lay" Copper / Brass

Materials 7

Internal Busbars: Formed Pressed Brass

Materials 8

Earth Strap: Mild Steel

Materials 9

PCB: Mixed Components

Operating Voltage - Maximum (AC)

250

Operating Voltage (AC)

250

Frequency (Hz)

50

Load Rating (A)

13

Terminal Size (mm)

Ø5

Terminal Torque Value (Nm)

2

Terminal Capacity - Solid (mm²)

3 x 2.5 or 3 x 4

Termination Type

Screw

Supplied Back Box Depth (mm)

40

Plate Fixing Centres - Horizontal (mm)

120.6

Single Pole Switched

Yes

Twin Earth Terminal

Yes

Back Box Earth Terminal Supplied

Yes

Catalogue Part Number 1

CLRCDP036

Full Code

CLRCDP036

Sub Header

RCD Socket Outlets c/w 40mm Mounting Box

Price List Main Header

Metal Clad Wiring Accessories

Catalogue Main Header 2

Socket Outlets c/w Back Box

Catalogue Main Header 1

Metal Clad Accessories

Cleaning Guidance

For cleaning / polishing of products, use only a soft, dry, clean cloth.

Additional Information

Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. The Cable must be routed through the most suitable entry point of the mounting box. When using the Metal Clad back box the top or bottom central knock out should not be used. If the central knock out is required then the CL088 50mm deep backbox may be used.

TDS Image 2

WARCDP036-B

Standards

BS 1363-2, IEC 62640, BS 7288, SASO 2203, IEC 61000-6-1 & IEC 61000-6-3

Warranty - Electronics (Years)

2

Warranty (Years)

20

Operational Temperature (°C)

-5 to +40

Operational Temperature - Maximum (°C)

40

Operational Temperature - Minimum (°C)

-5

Ingress Protection

IP20

Trip Speed

Less than 40ms at 150mA Residual Current

Through Fault Withstand (A)

1500

Breaking Capacity (A)

250 (Earth Leakage)

Back Box Knockouts - Total (mm)

7 x Ø20

Back Box Knockouts - Top (mm)

3 x Ø20

Back Box Knockouts - Bottom (mm)

2 x Ø20

Back Box Knockouts - Sides (mm)

1 x Ø20

Back Box Knockouts - Rear (mm)

None

UKCA Compliant

Y

CE Compliant

Y

CE RoHS Directives

2011/65/EU & 2015/863/EU

CE REACH Directive

1907/2006/EU

CE Packaging and Packaging Waste Directive

94/62/EC

UKCA LVD Statutory Instruments

UK SI 2016 No. 1101

UKCA Plug & Socket Regulation

1994 No. 1768

UKCA RoHS Statutory Instruments

UK SI 2012 No. 3032

UKCA Packaging and Packaging Waste Directive

UK SI 2013 No. 3113