FL COMP SN 30/50 V 42W ML 8304065 BK

Product benefits

• Demand optimized illumination due to flexible and programmable sensor
• Easy adjustment of sensor range, daylight detection, hold time and dimming function
• Always-on override, activated via special mains switching pattern
• Highly versatile due to selectable CCT and lumen steps (Multi Select) thanks to a switch on the backside
• Robust cable gland with integrated waterstop function
• Breather membrane to optimize air exchange, without compromising IP protection
• Bright, robust and durable
• Energy savings of up to 90 % compared to halogen lamp floodlights
• No upper light output ratio (ULOR 0%) when mounted at 0° tilt

Areas of application

• Replacement for floodlights with halogen lamps
• Outdoor use (IP65)
• Public areas
• Building facades
• Construction areas
• Gardens, balconies and other outdoor areas

Product features

• Flexible motion and daylight sensor
• High luminous efficacy: up to 150 lm/W
• Type of protection: IP65
• Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires
• Reflector-based, symmetric light distribution with 100° x 100° beam angle
• Mounting bracket with 30° angle and wide rotation area
• Integrated voltage driver, suitable for 220 - 240 V AC

Safety advice

• Max. wind load surface 18 W =  0,010 m² / 42 W = 0,018 m² / 70 W = 0,033 m² / 105 W = 0,044 m² / 135 W = 0,060 m² / 178 W = 0,074 m²
• All electrical connections must be made by a qualified person.
• Caution, risk of electric shock.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire must be disposed of.
• Terminal block not included. Installation must be made by a qualified person.
• To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
• Product in protection class I. All electrically conductive, metallic housing parts that can absorb voltage during operation or during maintenance in the event of a fault must be continuously connected to the protective earthing conductor.

References / Links

• For Guarantee see www.ledvance.com/guarantee