Skip to content
Voltimum
Voltimum+ Loyalty Programme
Schneider Electric

IPRD20r modular surge arrester - 3P + N - 350V - with remote transfert

IPRD20r modular surge arrester - 3P + N - 350V - with remote transfert by Schneider Electric is listed by 3 electrical wholesalers on Voltimum UK, including Farnell, Rexel Group and City Electrical Factors. It is currently in stock at 2 of them. Trade prices range from £539.06 to £852.56 excl. VAT. Voltimum+ members earn 88 points per unit.

This Acti9 iPRD20r surge arrester protects 3P+N installations. it allows quick replacement of damaged cartridges. This Type 2 device is recommended for medium risk level and incoming panel board. It offers remote reporting of the "cartridge must be changed" message. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. It is compatible with TT and TN-S earthing system. The Imax rated discharge current is up to 40kA. The In nominal discharge current is 15kA. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Uc maximum continuous operating voltage in common mode (between neutral and earth) is 260VAC. The Up maximum voltage protection level is 1.4kV in common mode and 1.2kV in differential mode. The Un rated service voltage is 230VAC or 400VAC. The operating frequency is 50Hz or 60Hz. The dimensions are (W) 72mm x (H) 85mm x (D) 69mm. The width in 9mm pitches is 8. The weight is 450g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.

Product identifiers

SKU: A9L20601
EAN: 3606480506437
GTIN: 3606480506437
MPN: A9L20601

Voltimum+ Loyalty Programme Loyalty points: 88

Price range: £ 539.06 - £ 852.56 Excl. VAT

Categories

Switchgear Low Voltage Switchgear Switchgear & Circuit Protection

ETIM group

Earthing, lightning and surge protection

Specifications

Category type 2 yes
Max. PV-voltage -
Mounting method DIN rail (top hat rail) 35 mm
Construction size 4 modular spacing
Nominal voltage AC 400 V
Nominal voltage DC -
Leakage-current free no
Integrated backup fuse no
System configuration IT no
System configuration TT yes
Voltage protection level 1.4 kV
System configuration TN-C no
Max. continuous voltage AC 350 V
System configuration other no
Voltage protection level L-N 1.2 kV
With remote signalling contact yes
Max. discharge surge current (8/20) 20 kA
Number of conductors (without earthing) 4
Max. conductor cross section flexible (fine-strand) 16 mm²
Integrated short-circuit protection selective to fuse gG -
Max. overcurrent protection device, parallel connection (fuse) 40 A

Documents

Declaration of Conformity (Sustainability)

A9L20601 REACh Regulation

Open

Instruction sheet

iPRD (Type 2) withdrawable surge arresters Instruction Sheet

Open

Product data sheet

Open

Catalog

Acti9 Isobar P Active Safety System

Open

Declaration of Conformity (Sustainability)

A9L20601 EU RoHS Directive

Open

Declaration of conformity

EU Declaration of Conformity Schneider Electric

Open

Declaration of Conformity (Sustainability)

A9L20601 POP Directive

Open

Declaration of Conformity (Sustainability)

A9L20601 OECD PFAS Regulation

Open