The publication of IEC 62561-8:2026 marks the introduction of the first international product standard for components of electrically insulated lightning protection systems.
It supplements the IEC 62305-3 lightning protection standard, which sets out the planning, installation and required separation distances. Whilst IEC 62305-3 specifies when and where a separation distance must be maintained, the new IEC 62561-8 defines the requirements and test procedures for the components used to achieve this distance in practice. Together they create a consistent regulatory framework, from the planning stage right through to the certified product. DEHN’s HVI and DEHNiso ranges have been tested in accordance with IEC 62561-8, providing a technically verifiable basis for standard-compliant insulated lightning protection solutions.
Electrically insulated lightning protection has established itself as a technologically mature solution that comes into its own where conventional systems reach their physical limits. This is particularly relevant when the deliberate and targeted routing of lightning currents is required in structures with an unknown current-carrying capacity or in potentially explosive atmospheres. Today, high-voltage-resistant insulated conductors (HIL/HVI) are regarded as the state of the art in sensitive technical environments, such as mobile communications, wind power and chemical plants, potentially explosive atmospheres, and installations with sensitive electrical or electronic infrastructure. This technology is particularly relevant for complex roof and façade structures, especially when the distance to conductive components is only small. In addition, it is suitable for buildings with an increased fire risk due to flammable roof coverings, organic insulating materials or other fire-hazardous building materials. The aim is to install standard-compliant lightning protection products to prevent lightning strikes in and around the building: in short, preventative fire protection.
The introduction of IEC 62561-8 as an international product standard is a necessary response to the varying levels of quality in the market for safety-critical lightning protection components. As the reliability of these components has a direct impact on the protection of human life and material assets, the standard sets out precise test procedures based on many years of scientific research. It describes tests for environmental resistance, mechanical withstand, lightning current carrying capability and dielectric strength. In addition, there are system tests for defined arrangements such as proximity to metallic components, supporting tubes, or down conductors routed in parallel. The demanding and stringent testing requirements set out in the product standard make it easier to compare the quality of lightning protection components and lay the foundations for high-quality and safe lightning protection components.
HVI and DEHNiso products from DEHN are tested by certified and accredited laboratories in accordance with IEC 62561-8. The systems are designed for specific applications and enable standard-compliant implementation of electrically insulated lightning protection concepts. The key factor here is the combination of tested components, proper planning and professional installation. Compliance with specifications such as bending radii, stripping lengths, connection torques and permissible distances ensures the long-term protective function. For planning engineers, installers and operators, this means increased certainty when selecting products, verifiable technical quality and a standard-compliant basis for applications in which hazardous overvoltages, partial lightning currents, fire risks or malfunctions in sensitive equipment must be reliably prevented.
See more from Voltimum on Google
Add Voltimum as a preferred source and Google will show our articles more often in your news results.