We discuss the advantages, and how to use the connectors in this article.
Advantages:
- Convenient wiring via extremely compact design
- Push-in termination of up to eight solid and stranded conductors
- Conductor range: 0.75 … 4 mm² “s” and 1.5 … 4 mm² “st”
- Any combination of conductor sizes is possible
- PUSH WIRE® connection terminates solid (“s+st”) copper conductors
Design:
The transparent housing shows if conductors are fully inserted; within the colored base, a clear port shows if the conductor's strip length is correct.
Conductors are correctly stripped if the clear port shows no bare conductor on the unprinted connector side. Picture shows center conductor with exceeded strip length.
How to use:
Termination: Insert the stripped conductor until it hits the backstop.
Removal: Hold solid conductor to be removed and twist alternately left and right while pulling the connector.
Solid conductors are inserted into the connector by simply pushing them in.
Stranded conductors are inserted into the connector by simply pushing them in.
