The quickfire Quickwire junction box – where time and technology converge.
Using Quickwire’s Switch and Load junction box means it’s never been faster, easier, or safer to install domestic lighting
This small, narrow handy junction box means electricians can move away from ceiling roses (with the three-plate or loop-in wiring method) and offer clients modern, trendy light fittings installed professionally and compliant with the regs.
The beauty of Quickwire’s junction box is all the wiring is pre-configured inside the housing. There are four inputs – the load, two for the power, and one for the switch. All the trimming and cutting information is provided on the junction boxes – helping with your install. But how quick is it to switch, loop, and feed cable into this handy little tool?
The team at Quickwire set themselves the task of proving their junction is quick off the mark – and all is revealed here...
The outer grey sheath of the cable is stripped by 20mm to 22m, the inner cores by 15mm to 17mm using the Jokari FKZ Flat Wire Automatic Stripper.
Quickwire’s junction box can be used with 1mm and 1.5mm twin and earth cable and is rated at 250V and 16A. It can only be used with solid core cable.
Quickwire’s mission is to make installation safe, quick, and trouble-free. Visit www.quickwire.co.uk for more time-saving products.