MET1000 Megger’s Other Multifunction Tester

Most electricians have heard of Megger and probably immediately think of Megger’s MFT range. MFT of course stands for Multi Function Tester. But there is another Megger Multi Function Tester in the range that electricians may not be so aware of

Published: 21 April 2022 Category: Training related PDFs

Topics

Electric Vehicle Infrastructure

Megger

MET1000 Megger’s Other Multifunction Tester

Published: 21 April 2022 · Category: Training related PDFs

From this document

MET1000 Megger’s Other Multifunction Tester Gordon Billings Introduction Most electricians have heard of Megger and probably immediately think of Megger’s MFT range. MFT of course stands for Multi Function Tester. But there is another Megger Multi Function Tester in the range that electricians may not be so aware of And that is………. Introduction The Megger MET1000 Key Features The MET1000 is a general purpose Electrical Tester. It comes with CAT IV 600 V Safety Rating It benefits from an IP65 Environmental Class Key Features The MET1000 has auto power on Single pole voltage indication Voltage indication with dead or no batteries Complies to IEC/EN 61243-3 All of which means….. Key Features It can be used as a 2-Pole Tester as part of safe isolation Key Features The MET1000 has True RMS AC measurements on voltage and current Key Features The MET1000 features an open jaw AC clamp giving current measurement up to 200A Key Features There is also resistance measurement up to 50 kΩ Key Features On top of those features it also has: A Phase Sequence Indicator An Extra Low Voltage (ELV) indicator. Key Features Other features on the MET1000 include A Hold function LCD Screen Backlight LED Torch Screw-on interchangeable GS38 and Euro 4mm tips Key Features The MET1000 comes with removeable leads. Leads are interchangeable Key Features The MET1000 also comes complete with a useful belt pouch • Questions?

Open the PDF