It supplies - Voltimum - Search | | Results of your search | Results 91 - 100 About 15606 For it supplies (0.69 Seconds) | | | | [...] lift need a local change over device with resilient routed cables or can a panel board be installed with the two electrical supplies and one cable | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | [...] motorised valve on one of the sites I am working on. The valve is 24VDC actuated with a power consumption of 135W, the valve will be supplied via a 230VAC/24VDC power supply within the control panel. The valve is approx 330 metres away from the control panel, [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | Power supplies from Weidmüller have long since proved their worth in supplying electrical modules. They can therefore be used safely [...] | | http://www.voltimum.co.uk/catalog/fam/WEU-/013/010/WEU-group[...] | | | | | We are due to re - wire a fourth floor flat that is currently being supplied by a twin & earth cable 16mm/6mm cpc submain. It is a TNS supply. As this is an existing supply does the cpc size need increasing? Thanks Rowan | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | We require to install 3 seperate ring main ccts, for 13A socket outlets, into the same room (large workshop) we wish to supply each cct from a different phase of the 3 phase supply DB we have near by. Is this allowed iaw the regs, are there any | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | Can someone clarify the regulation, regarding the proximity of an incoming water supply to the incoming supply cable/ main fuse/ consumer unit etc in a house? Thanks R Wardlaw | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | In a domestic installation where the supply meter is located in an external meter box and the consumer unit is further away than 2m, firstly is it a mandatory requirement to install an isolator, and secondly can the supply authority insist that | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | Is it allowed for me to convert a TN - S system to a PME system without informing the supply company first. This is because of high Ze readings from the main supply. If this is not possible[...] armoured supply | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | Is it allowed for me to convert a TN - S system to a PME system without informing the supply company first. This is because of high Ze readings from the main supply. If this is not possible[...] armoured supply | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | iam working out the maximum demand in kva for a new development to supply 24no.single phase supplies with a total load of 2500A,iam i correct in my calculation of 575kva total and 191.66kva per phase.many thanks | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | |
|
|
|
