A new and authoritative guide to the Building Regulations, published by the ECA and the NICEIC[...] with Part P of the Building Regulations, the NICEIC and the ECA have jointly published the Electrical Installers' Guide to the Building Regulations
Now that the L2 Building Regulations are upon us, which cover the conservation of fuel and power, the monitoring of power consumption is extremely important, says ABB: Section 3 of the L2 Building Regulations [...]
Smart Power & Lighting MCB distribution board provides cost effective compliance with Building Regulations Part L2 by offering an integrated split load meter delivering independent metering
I have been asked to look at the installation of a step down transformer unit which would permanently reduce the voltage level on an existing power supply to a building by 6 - 8% to save energy[...] wiring regulations. thanks Mike Doyle
Hi would you be able to help with a technical question regarding domestic smoke alarms (Mains powered LD3). With the 17th edition new board layout we would like to connect to a local lighting circuit[...] breaker position, [...]
I have been ask to connect a generator to a domestic dwelling in case of power faliure. They Have provided a switching device that can be switched in case of mains faliure this is 30ma rcd protected[...] [...]
Please advise if there are any regulation requirements as to when you should carry out Electrical 'Dead' testing. I always carry out this as close as possible to livening up the installation, however[...] to cabling prior to power
[...] "PTC" auto - regulated and surface temperature limited : t = 70 °C Heat dissipator in black aluminium oxide Fix on rail Power: 20 W Current rating: 0.8
[...] "PTC" auto - regulated and surface temperature limited : t = 70 °C Heat dissipator in black aluminium oxide Fix on rail Power: 60 W Current rating: 1.5
[...] "PTC" auto - regulated and surface temperature limited : t = 70 °C Heat dissipator in black aluminium oxide Fix on rail Power: 120 W Current rating: 3.2