Readingrcd on ze test tncs - Voltimum - Search | | Results of your search | Results 61 - 70 About 13129 For reading-rcd on ze test tncs (0.8 Seconds) | | | | Hi, When we measure the Ze at the origin, is this Ze value effectively the Zs value of the cut - out? (i.e. should we compare the Ze with [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | [...] circuit test reading, is answered by the NICEIC: Question: I've recently carried out a periodic test. The Ze reading is 26 ohms, which is unsatisfactory. I've installed an earth rod and my Ze reading is 9.5 ohms, [...] | | http://www.voltimum.co.uk/news/14106/s/Q-A-of-the-Day-Is-thi[...] | | | | | On new/build houses supplied by a tncs old pme system.Some were fitted where the type of iso/swt fitted was double pole. On others single pole iso/swt were fitted [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | I recently rewired an old terraced house and when i came to test and inspect the new installation i found the Ze at the supply authority cut out was 4.08 ohms. This was tested in the correct fasion[...] had installed a new 17th edition [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | the normal proceedure to get the pscc & Ze readings but the readings are very high,i'm using a robin loop & pscc instrument with 'D' lock.in have tried [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | in saying when testing the earth loop impedance (Ze) only the equipotential bonds should be disconnected | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | for the protective devices are maintained, normally through RCD devices. I have a site where the Ze is 4ohm. when testing i am getting earth loop impedance of 22 to 29 ohms, with disconnection time below 40ms at rated [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | . This one, concerning a rewire and unusual earth rod readings, is answered by the NICEIC: Question[...]: 'No protective multiple earth....get your sparky to sort it'! The earth rod reads 1200 ohms as the ground is very[...] the reading | | http://www.voltimum.co.uk/news/15506/s/Q-A-of-the-Day-Where-[...] | | | | | that this has been a 'limited' test and no Ze measurement can be checked / tested for compilence or any RCD's RCBo's tested on the installation either [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | Strain relief Strain relief,,4008190208738 | | http://www.voltimum.co.uk/catalog/prod/WEU-1632150000/prod-P[...] | | |
|
|
|
