Readingrcd on ze test tncs - Voltimum - Search | | Results of your search | Results 31 - 40 About 13129 For reading-rcd on ze test tncs (0.73 Seconds) | | | | by RCD. Done a loop test, Ze far greater than 200ohms. PFC not registering. Will it matter that Ze and PFC are poor, since everything is protected by RCd's | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | I have carried a periodic in Lon se4 the ze reading is 26ohm which is unsatisfactory .I have install a earth rod and my ze reading 9.5 ohms which [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | was rewired around 8 years ago but no RCD was fitted to the consumer unit. As the ZE was high I installed 2, 30mA RCD's (split load) and on test they tripped at 23.3ms and 24.2ms. Would this be [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | out a Ze measurement at the origin, is it better (or more accurate) to touch the instrument probe on the busbar rather than on the line [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | I recently looked at an installation that was neither TNCS or TNS yet when I carried out and earth loop impedance test I was able to measure 0.35ohms. I could identify the water and gas bonds[...] earthing or can consider the existing ELI reading [...] | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | . This one, concerning Ze and Zs (earth loop impedance) readings on a 32A TNS electrical installation[...] a Ze reading of 0.7. [...] | | http://www.voltimum.co.uk/news/12924/s/Q-A-of-the-Day-Is-thi[...] | | | | | , for which we have a Ze of 20 ohms on the rods only. When connected up to steel etc, we are getting a reading[...] the 300ma RCD, because [...] | | http://www.voltimum.co.uk/news/15866/s/Q-A-of-the-Day-Can-th[...] | | | | | . This one, concerning a TN - C - S electrical installation and Ze values (earth loop impedance external to installation), is answered by SELECT: Question: I've just been testing a new [...] | | http://www.voltimum.co.uk/news/12986/s/Q-A-of-the-Day-Should[...] | | | | | at source, this installation exists. 2.9x13x560/1000= 21.1v, this must be wrong. I have test results back[...] could also show how to calculate Ze for this, I know Zs=0.24Ohms. Ze=Zs+(R1=R2)? Thanks | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | | | | at source, this installation exists. 2.9x13x560/1000= 21.1v, this must be wrong. I have test results back[...] could also show how to calculate Ze for this, I know Zs=0.24Ohms. Ze=Zs+(R1=R2)? Thanks | | http://www.voltimum.co.uk/consult.php?action=main&mode=consu[...] | | |
|
|
|
