- Metalclad Plus Connection Units
- Metalclad Plus High Current Switches
- Metalclad Plus Plateswitches
- Metalclad Plus Sentrysocket
- Metalclad Plus Socket Outlets
Metalclad Plus Connection Units
A range of 13A fused connection units and 20A DP switches designed for the connection of refrigerators, water heaters, central heating boilers and other fixed appliances. The ranges are designed for ease of installation and have the advantageous design features of the Metalclad Plus range.
Click here to download the full document in PDF 219 KB, 2 pages
Metalclad Plus High Current Switches
A range of switches and cooker control units harmonising with the Metalclad Plus style, suitable for the switching of all domestic, commercial and industrial appliances where higher current ratings are required, i.e. cookers, heaters, commercial refrigeration units etc. Metal units are particularly suitable for refurbishment projects.
Click here to download the full document in PDF 170 KB, 2 pages
Metalclad Plus Plateswitches
A comprehensive range of tough, impact resistant, surface mounted plateswitches. They have been designed to suit a wide variety of applications in factories, workshops, plant rooms, warehouses, schools and hospitals. The frontplate has smooth chamfered edges engineered to fit flush with the backbox. Backboxes with or without side knockouts are available and all have a central knockout in the base. Wide rocker switches are also available.
Click here to download the full document in PDF 205 KB, 3 pages
Metalclad Plus Sentrysocket
Sentrysocket provides a high level of protection against electrocution and gives further protection when used with appliances vulnerable to insulation damage, particularly when they are in damp environments or outdoors. Sentrysocket is not suitable for mounting in damp environments or outdoors. Sentrysocket, incorporating an RCD, is part of a complete range of fixed and portable wiring accessories and circuit protection devices suitable for use in domestic, commercial and industrial applications.function under all the normal conditions expected of an RCD, but will also trip in the event of a power cut or a sudden, dramatic reduction in mains voltage. This makes them ideal for use where it would be hazardous for equipment to suddenly energise after return of mains power, such as use with rotating machinery and heat developing apparatus.
Click here to download the full document in PDF 180 KB, 2 pages
Metalclad Plus Socket Outlets
A range of socket outlets designed for ease of installation and having all the advantageous design features of the Metalclad Plus range. The 2 gang sockets with outboard rockers are of particular value for use by the infirm and partially sighted. Non-standard, clean earth sockets are for use on installations where restricted access is required and will only accept MK LN647 13A non-standard plug with T-shaped earth pin. The sockets have two independent earth terminals so that they can also be used for ‘clean earth’ installations.One gang switchsockets, two gang outboard switchsockets and two gang unswitched sockets are fitted with two earth terminals on a common busbar to provide a double earth facility for use when installations are to comply with Regulation 607 of BS 7671, IEE Wiring Regulations. These should be referred to for guidance. The products can be quickly installed as replacement for existing 13 amp sockets or in a new installation.
Click here to download the full document in PDF 268 KB, 3 pages
BookmarkThis