Digitemp, from low carbon ventilation specialist Xpelair, gives summer cooling and winter warmth from its stylish wall mounted units. Quickly and simply installed from inside the room, even at multiple stories, to a patented external folding grille system. This eliminates the need for awkward and sometimes impossible external access.
|
| Domestic comfort cooling |
|
Xpelair’s Digitemp comfort cooling technology is designed specifically for domestic and specific small commercial use, to give year round economical heating and cooling comfort; as an advanced ‘air to air’ heat-pump Digitemp is part of Xpelair’s carbon saving CarbonLite range.
Despite this impressive low carbon performance, the whole thing fits into a modern, stylish case. With no outdoor condensing unit to install and no gas connection necessary, the unit can be fitted at high or low level for optimum flexibility without specialist skills. The integral refrigerant system is factory sealed, so installation does not require the opening of the entire system or any connection to hoses.
Cooling, heating and dehumidification are regulated by the convenient hand-held remote control and all operational modes are programmable using the infrared handset – allowing total control and adjustment from distance.
Digitemp uses a three-speed fan including night mode for extra quiet operation. Economic and efficient, Digitemp combines low carbon, low power consumption when cooling, with a high efficiency heating capacity.
Two of the models, the WA210N and WA245N provide cooling only, whilst the WHP210N and WHP245N deliver the convenience of heating and cooling in one advanced unit.
To choose the correctly sized unit, installers, contractors or specifiers can select the Digitemp variant based on the room sizes to be “comfort cooled”. This most effective when specified in terms of the heat load of the room - selecting the correct variant to overcome that heat load, measured in Watts. There are many factors involved in measuring heat load correctly, such as solar gain and building fabric U-values. It’s good practice to keep these in mind, but as the Digitemp is designed for domestic and specific smaller commercial applications it’s much less of a problem than the larger, full scale air-conditioning projects.
For more information on Digitemp or other technologies in the CarbonLite range contact Xpelair direct on 08709 000450, alternatively visit www.xpelair.co.uk
| Source: Applied Energy Products - Xpelair |
|
|
Back