Fluke has introduced a choice of three rugged Electricians Kits which provide a complete solution to all installation test requirements, including those for Part P:
|
| One of the Fluke test kits. |
|
Including an installation tester, a two-pole tester and a socket tester, each kit offers a 10% cash saving and includes a £50 voucher towards a training session with Fluke's training partner, ETS.
The Fluke 1651/PKiT comprises a 1651 multifunction tester (which was specially designed to test all the requirements in the latest Part P Building Regulations with one single piece of equipment, and which uses a patented advanced loop measurement technology to prevent electronic and passive type RCDs from tripping during earth-loop testing); a T100 two-pole voltage and continuity tester, which features an array of LEDs to indicate AC or DC voltage levels from 12V to 690V, and a patented three-phase rotation detection system; and the latest SM100 socket tester, with three vivid bi-colour LEDs which indicate missing earth, live/earth reverse, live/neutral reverse, missing neutral or live faults.
The Fluke 1652/PKit comprises a 1652 multifunction tester (which tests all the requirements of Part P and offers automatic RCD testing and a remote probe); a T120 two-pole tester, which features a 1999 digit LCD display and LED bargraph to indicate voltages from 12V to 690V AC/DC, a patented three-phase rotation detection system, and the latest SM200 socket tester. The latter has a similar design to the SM100 but includes a buzzer which changes sound in the event of a fault being detected.
The Fluke 1653/PKit comprises a 1653 multifunction tester (which has additional functionality to the 1652, enabling advanced uploading of stored results to a PC for software analysis and providing earth resistance and phase sequence measurement), a T140 two-pole voltage and continuity tester (similar to the T120 but also measuring resistance and incorporating a backlight in the LCD display), and the latest SM300 socket tester, which is similar to the SM200 but also offers 30mA RCD checking.
The kits, which offer 10% savings over the list price of individual components, can be purchased from Fluke authorised wholesalers and distributors.
The picture shows one of the Fluke test kits.
|
If you like this article and want to share it with friends, please use the social links below:
|
|
Back