New Pipesight Laser Plumb Line Makes Light of Radiator Alignment

Pipsight is designed for use with 15mm and 22mm diameter radiator pipes.  With 15mm pipes, the plumber simply connects the knurled end of the Pipesight to the threaded end of 1/2”BSP pipe fitting.  It is then screwed until finger tight and the laser activates within two turns.  The laser spot can then be marked with a pencil.  The Pipesight is unscrewed and a hole can be drilled in the correct position to align the copper pipe.

When using 22mm pipe, the nylon adaptor is screwed on to the 3/4”BSP pipe fitting so that the ½”BSP thread faces out.  The Pipesight can then be screwed on to the fitting until finger tight.  Again, the laser normally activates after a couple of turns and the same marking and drilling process can be carried out.

Pipesight comes supplied with four button cell LR 41 batteries that will give 1-2 hours of continuous use and can perform around 2500 operations.  It is supplied in blister packaging with full user instructions and illustration.
 
For more information visit and to purchace this product go to www.kopex-pipetools.co.uk or contact the Marketing Department, Kopex International Limited, Station Road, Coleshill, Birmingham, B46 1HT, Fax:  01675 464276, Email:  marketing@pipeslice.com