Now available from Redring, one of the UK’s major names in electric heating and hot water solutions, is a comprehensive range of immersion water storage heaters – the standard heater for use in soft and normal water areas.
|
| Aqualoy |
|
|
| Copper |
|
|
Dual cut-out immersion heaters comply with the European safety standard, EN 60335-2-73 for fixed immersion heaters. All Redring dual cut-out immersion heaters are supplied complete with rod thermostat, and are manufactured with a separate, 'secondary manual reset safety cut-out' fitted directly to the immersion head.
This ensures that all Redring immersion heaters are compliant, and do not rely on the fitting of a combined rod thermostat with cut-out to meet the safety requirement.
Dual cut-out immersion heaters are available in standard copper or Aqualoy variants for use in more aggressive water areas.
Also available is the Economy 7 Time Controller – an immersion heater controller suitable for use with single, dual or two element immersion heaters. It is pre-programmable for automatic boost and one hour manual boost, as well as featuring one minute accuracy, which eliminates accidental running over into full rate tariff periods.
The Redring Electronic 7 immersion heater controller allows up to three secure off-peak heating periods every 24 hours to make the maximum use of cheap rate structures, including split tariffs, and is therefore especially useful for homeowners on a tight budget.
Redring offer one of the most comprehensive range of electric water heaters and hot water solutions in the UK market. All Redring immersion water heaters comply with BS EN 60335-2-73:2003 are WRAS and CE approved and come with a 1 year manufacturers’ guarantee.
FOR MORE INFORMATION ON THIS OR ANY OTHER REDRING PRODUCT VISIT www.redring.co.uk OR CALL 08709 000540
|
BookmarkThis
Back