|
|
 |
Large Unvented Storage Water Heaters
|
|
 |
Product Ref.: LWC75Di
|
|
|
|
|
|
75 Litre Large Unvented Storage Water Heater
Key Features:
- 'A' grade copper cylinder
- Indirect versions have high efficiency copper coil heat exchanger and 3kW immersion heater for summer water heating
- The 100, 144 and 210 litre capacity models feature 2 x 3kW immersion heaters to gain maximum benefit from 'Off-Peak' tariffs
- Immersion heaters are incoloy for longer life even in hard water areas
- Finished in leatherette-coated grey steel for a clean finish
- Insulated with CFC free PU hard foam for energy efficiency
- Fitted with an internal expansion bubble, so no need for external expansion vessel
- Safety features include 3 levels of pressure control and 3 levels of temperature control
- Immersion heaters have control thermostat range adjusting from 20-65°C – High limit stat operates at 80°C
- 2 year guarantee on cylinder and 1 year guarantee on components (UK)
- BEAB, WRAS and CE approved
Product Specification: Direct System
- Electric boiler for the supply of mains pressure hot water
- Power ratings of 2.7-3kW, or 2 x 2.7-3kW
- Available in capacities of 50, 75, 100, 144 and 210 litres
Product Specification: InDirect System
- Electric boiler with central heating boiler heat exchange facility for the supply of hot water
- Power ratings of 2.7-3kW @ 230-240V
- Available in capacities of 144 and 210 litres
Installation:
- Supplied with pressure reducing valve incorporating an in-line strainer, loose check valve, expansion relief valve, temperature & pressure relief valve and tundish making the LWC complete for installation
- Inlet and outlet connections are via 22mm compression fittings
Installation accessories provided:
- Tundish
- Expansion valve set at 3bar
- Pressure reducing valve set at 1.5bar
- Line strainer
- 2 port diverter to secondary heating circuit (indirect only)
- Temperature and pressure relief valve
Flow Rates:
Balanced hot and cold water pressures give many advantages. Flow rate, not pressure, is the true measure of performance. The LWC units are comparable to any other unvented cylinder currently listed by the BBA providing a ‘power shower’ without a pump and filling a bath in just a few minutes.
Dimensions
Height: 1050mm
Diameter: 460mm
|
|
|
|
|
|
|
|
|
|
|
